|
|
| (2 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| − | ==Overview==
| |
| − | This is an introduction and a brief overview covering the operation of the '''ETC Smartfade ML Lighting console''', located in '''[http://www.thestagestl.com/ The Stage]'''.
| |
| | | | |
| − | This page is intended for production personnel and volunteers who are in need of some instruction on how to operating the console. For access to advanced processes and information, please refer to the lighting console manual, which is located with the other gear documentation in the sound booth.
| |
| − |
| |
| − | ==Operating the console==
| |
| − | ===Turning On/Off the light console===
| |
| − |
| |
| − | :To turn '''ON''' the light console, locate the power button at the top right of the light console and press it. It will take a few moments for the console to boot up. Once the boot up process is finished the console will be available for use.
| |
| − |
| |
| − | :[[File:EtcOn.jpg]]
| |
| − |
| |
| − | :To turn '''OFF''' the console, locate the power button at the top right of the light console and press it. You will then be prompted to '''CONFIRM''' or '''ABORT'''.
| |
| − | ::- To '''ABORT''', select the '''NO''' button just below the text '''ABORT''' in the LCD window. It will be labeled with a '''NO''' underneath the button.
| |
| − | ::- To '''CONFIRM''' select the '''YES''' button, which is also the '''MENU''' button, just below the text '''CONFIRM''' in the LCD window.
| |
| − |
| |
| − | ::[[File:EtcOff.jpg]]
| |
| − |
| |
| − | :If you still have lights on after shutting down the console, proceed to [[Troubleshooting ETC Light Console]].
| |
| − |
| |
| − | ----
| |
| − |
| |
| − | ===Using saved memories===
| |
| − | To access and use saved memories on the light console, make sure the light console is ON first.
| |
| − |
| |
| − | There are 12 banks of memories on the SmartFadeML light console, with each bank containing 12 more additional memories.
| |
| − |
| |
| − | To access a memory bank on the light console:
| |
| − | :- Press and hold the '''MEMS''' button, the fader buttons should start blinking.
| |
| − | :- Select the memory bank that you would like to use.
| |
| − | :- When holding down the '''MEMS''' button, notice that one of the flashing fader buttons is brighter than the others. That button will be the current memory bank selected.
| |
| − | :- if you want to access a different memory bank, press a different fader button. Beginning users of the console should only use Memory Bank number one.
| |
| − |
| |
| − | :[[File:EtcMem.jpg|500px]]
| |
| − |
| |
| − | To use a light scene that is saved within a memory bank, slide the fader memory up (1-24) to the desired intensity.
| |
| − |
| |
| − | ----
| |
| − |
| |
| − | ===Programming memories===
| |
| − | Programming the light console is for '''advanced users only'''. If you are an advanced user, please DO NOT overwrite any memories currently saved on the light console. If there are not any available memory banks, notify the facility manager to assist.
| |
| − |
| |
| − | There are a handful of ways to program the memories on the ETC SmartFadeML Light Console. The current recommendation is to use the REC SEL method, not the REC ALL method. During a live show, the lights will often change to unknown colors and do things that are not logical in the REC ALL mode.
| |
| − |
| |
| − | #Press the '''DEVICE SELECT''' button, located in the center of the console
| |
| − | #Press the '''PARAM 1''' button, located in the button bank to the left of DEVICE SELECT.
| |
| − | #When both buttons are lit, you can start selecting fixtures that you would like to program.
| |
| − | #:'''Note:''' There are three rows of light fixtures with four lights per row and there are also two moving head lights. Your main focus will the LED fixtures; only facility managers and trained users able to use the moving head lights.
| |
| − | #'''Choose the fixtures''' you would like to program (9-20) by selecting them.
| |
| − | #'''Slide the fader''' number up one notch in intensity and press the '''COLOR''' button located above that same fader.
| |
| − | #'''Select a color'''.
| |
| − | #The selected light fixtures should change to the chosen color. If not, repeat the above steps.
| |
| − | #If you are satisfied with the color, deselect those fixtures and choose another set of fixtures to program, if that is your intention.
| |
| − | #If you only want to program a single choice color and fixture, '''SAVE''' the memory.
| |
| − | #Press the '''RECORD SEL''' button, located by cross faders, and save the memory to its proper location.
| |
| − | #All of the fader buttons should start '''flashing red'''.
| |
| − | #Press and hold down the '''MEMS''' button to verify which empty memory bank you are using to save. Available spots for memories will be indicated with a brightly lit red fader button. If all of the fader buttons are dimly lit, move to another memory bank.
| |
| − |
| |
| − | '''NEVER save a memory over an already existing fader memory!'''
| |
| − |
| |
| − | [[Category:Production]]
| |
| − | [[Category:The Stage]]
| |
